Sunday, May 10, 2009

[MW:2144] Re: 2140] SMAW consumable for the welding

I have Co based material which used as coat on other normal material  how can I replace this layer .
can I use the welding to do so please help me >>>>>>>>
seraj
  

From: PB HEGDE
Sent: Monday, May 11, 2009 12:21 PM
Subject: [MW:2141] RE: 2140] SMAW consumable for the welding

Hi!

Welding of this type of material (Used in machine tool ) is very critical and require to be welded by Eutectic type electrode. With proper preheating and technique. (Generally it is of Ni base) . You can approach L& T eutectic  or MAGNA (Austrelian  Co) they have the range of electrodes or Tig wire

Regards

 

Hegde p.B.

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of sandy kumar
Sent: Monday, May 11, 2009 2:35 PM
To: materials-welding@googlegroups.com
Subject: [MW:2140] SMAW consumable for the welding

 

Hi friends

Can anyone please tell me which SMAW consumable I can use to weld following material combination :-

 

1st material:-

C.

Si.

Mn.

S.

P.

0.50%

0.25%

0.70%

0.05%

0.05%

2nd material :-C=0.355,Si=0.6645,Mn=1.7084,P=.0209,S=0.0326,Cr=0.2083,Ni=0.0333, Mo=0.0314,

Cu=0.0226,Al=0.0182,Ti=0.0177,V=0.0935,Nb=0.0103

Please suggest which I can use if it is not suitable.

Best regards

Sandeep Kumar

 


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...