Thursday, May 7, 2009

[MW:2117] Re: preheat SA- 516 gr 70


It depends on thickness.
What is the thickness?

Thanks & Regards
----------------------------
Narendra Gohil
Welding Engineer
QAFCO
Ph.00974-4228289(O)
Mo.00974-6044289
Email: ngohil@qafco.com.qa

P Save a tree.  

Please don't print this e-mail unless it's really necessary.



From: "SAUL VASQUEZ T." <svasquez@ingetanques.com>
To: <materials-welding@googlegroups.com>
Date: 07/05/2009 04:50
Subject: [MW:2114] preheat  SA- 516 gr 70
Sent by: materials-welding@googlegroups.com





 
Dear   all
 
We are   API 650 steel tanks with  steel ASTM  516 gr70 and our client requests that preheat to 70°C - 100°C is this correct? The API 650   code section 7-1 that says that  preheat at 10°C


thanks all

 
 
 
Cordial saludo
Kind regards
Saul Vasquez T.
--------------------------------
INGETANQUES LTDA
Cra 8B Nº 190-81 
Tel. 57 (1) 6794382  Fax 57 (1) 6723793
CEL. 320-3469363  y  316-5388051
Bogota D.C.    Colombia.  http://www.ingetanques.com/
 
P Antes de imprimir este mensaje, asegúrese que es necesario. El medio
ambiente está en nuestras manos. No malgastes los recursos. Ten en cuenta
que son limitados.

 




--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...