[MW:2090] Impact Test Requirements- ANSI

Gents,

Is impact testing required for below material as per ANSI 31.1,31.3,31.4 or any

1) MSS-SP75-WPHY 65 ( Weld o let) - P1 Gr 2 Material

2) SA 106 Gr B - P1 Gr 2 Material


Thickness is 2.55mm,5.5mm and 13.5mm

MDMT 0 Deg C



Regards,
Alagu
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Subscribe to: Post Comments (Atom)

[MW:34866] Presentation for WPS ,PQR AND WPQ as per ASME Sec IX in power point

Dear Experts.        If anyone having presentation of WPS,PQR and WPQ  as per ASME  SEC.IX  in power point then please share . Regards Sanja...

• Materails FAQs

  Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
• RE: [MW:5585] Buttering of weld joints

  Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
• 

  WELD AND WELDING SYMBOLS

  Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...

Search This Blog