Saturday, April 11, 2009

[MW:1924] Re: Base Metal Qualifcation Range

My Friend,
 
If impact test is not applicable, the supplementary essential variable (Group No) will not be applicable. Hence base material Qualification range will be P1 Gr1 & 2 to P1 Gr1 & 2
 
Regards,
Rameshkumar

On Fri, Apr 10, 2009 at 1:35 PM, BHARAT GOLE <bharatgole@hotmail.com> wrote:
For SMAW process as per ASME section IX PQR qualified with Base Metal A106 Gr. B to A106 Gr. B i.e P No. 1 Group1 to P No.1 Group 1

Impact  & PWHT not applicable.

Please let me know what is Base Metal Qualified range for WPS...is it P 1 Group 1&2 to P 1 Group1&2   OR  P 1 Group 1 to P 1 Group 1

Regards

Bharat B. Gole




The new Windows Live Messenger. You don't want to miss this.



--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...