Tuesday, March 17, 2009

[MW:1773] RE: 1772] SMYS OF UNS 08904

SMYS 31 ksi, allowable 16.7 ksi for seamless and 14.2 ksi for welded pipe @ 200 °F


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Faigal Fernando Agbanawag
Sent: Tuesday, March 17, 2009 1:23 PM
To: materials-welding@googlegroups.com
Subject: [MW:1772] SMYS OF UNS 08904

 

Dear All,

 

Would anybody give me SMYS and the allowable stress @ 200F temp. of UNS 08904

 

Thanks in advance.

Faigal Fernando Agbanawag
Sr. Piping Engineer
Clough ZFP

T

+966 3 8828818 Ext: 241

F

+966 3 8828622

M

+966 (0) 507780576


Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the addressee(s) named herein. If you are not the intended recipient or addressee, you should not use, disseminate, distribute, copy or alter this email. Any views or opinions presented in this email are solely those of the author and might not represent those of "CZFP".

Warning: Although reasonable precautions have been taken to ensure no viruses are present in this email, "CZFP" cannot accept responsibility for any loss or damage arising from the use of this email or attachments. If you have received this electronic mail message in error, please contact the sender directly.



--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...