Tuesday, February 10, 2009

[MW:1535] Re: minimum length

Dear Javed,
 
   As per ASME 31.3 it should be 150mm

 Nilesh Parsekar,
 QC CO-ORDINATOR
(Dp Mech,API 510,API 570,AWS-CWI,NDT LEVEL2)
 Belleli Energy
 QATAR


--- On Tue, 2/10/09, Mohammad Javeed <mmubasharjaveed@gmail.com> wrote:
From: Mohammad Javeed <mmubasharjaveed@gmail.com>
Subject: [MW:1534] minimum length
To: materials-welding@googlegroups.com
Date: Tuesday, February 10, 2009, 1:09 AM

dear all, have a nice day
can any one tell me what is a  minimum length between two butt joints.( piece of pipe) with reference
thanks with regards
m javed


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...