Monday, February 9, 2009

[MW:1517] RE: 1516] painting

Hi,

Normally it is not allowed by most codes. I am afraid, you will have to get this approved from your customer.

 

Ravi Karkare
Material & Vendor Inspection Coordinator
J. Ray McDermott, Jebel Ali Yard
Dubai.
Cell ph. - +971 50 6459409
Off. - +971 4 8043274


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of sadique sheikh
Sent: Monday, February 09, 2009 11:32 AM
To: materials-welding@googlegroups.com
Subject: [MW:1516] painting

 

HI ALL OF U

My question is can we do painting of welded joints of pipe before hydro test?ALSo plz give me the reference of that.

Regards

Sadique Sheikh




--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
----------------------------------------------------------
This transmission is CONFIDENTIAL and the information is intended only for the use of the individual or entity to whom it is addressed.  If you are not the intended recipient, or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any use, dissemination, distribution or copying of this communication is STRICTLY PROHIBITED.  If you have received the transmission in error, please immediately notify us by e-mail and/or telephone, and delete the transmission and any attachments from your mailbox.  Thank you.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...