[MW:1503] Request to members

As informed through various communications in past, both materials-welding@googlegroups and piping_valves@yahoogroups respect the copyright laws and intellectual property rights. Any publication covered under copyright laws and/or intellectual property rights of an organisation / company shall NOT be shared through these groups. The members can help other members by informing where these publications can be purchased and by referring to any legal weblink where limited version is available for review or sharing.I hope that all members will abide by the rules.

Also pl post new queries with appropriate subject line, and don't reply to the ongoing thread

Thank you very much for your understanding.

-----Original Message-----
From: Nageswararao Nistala [mailto:nistala3@gmail.com]
Sent: Thu 05/02/2009 13:22
To: materials-welding@googlegroups.com
Cc: piping_valves@yahoogroups.com
Subject: Re: [MW:1466] Flange dimensions for size above 12" rating 2500#

Dear all any one having the below standard soft copy pl forward to me.

CSA Z245.21 & CSA Z245.20

Regards

Nagu

On Mon, Jan 19, 2009 at 1:13 PM, Bathula Raghuram (Mumbai - PIPING) <
R.Bathula@ticb.com> wrote:

>
> http://www.woodcousa.com/webtools.htm
>
> You may visit link for good info on API flanges and rating comparison
> between ASME/API
>
>
> -----Original Message-----
> From: materials-welding@googlegroups.com
> [mailto:materials-welding@googlegroups.com] On Behalf Of Srinivasan R.
> Sent: Monday, January 19, 2009 1:18 PM
> To: materials-welding@googlegroups.com; piping_valves@yahoogroups.com
> Subject: [MW:1465] RE: 1463] RE: 1462] Flange dimensions for size above
> 12" rating 2500#
>
>
> API- 6A gives dimensions of flanges upto 20000 psi
>
> Regards
>
> Srinivasan.R
> Valdel engineers & constructors
> Bangalore
>
>
> -----Original Message-----
> From: materials-welding@googlegroups.com
> [mailto:materials-welding@googlegroups.com] On Behalf Of Somesh Kumar
> Pandey
> Sent: Monday, January 19, 2009 12:17 PM
> To: materials-welding@googlegroups.com; piping_valves@yahoogroups.com
> Subject: [MW:1463] RE: 1462] Flange dimensions for size above 12" rating
> 2500#
>
>
> Dear Vinayak,
>
> If you want to use the 2500# flange above 12" size, probably you need to
> design the flange as non standard flange per Appendix -2 of ASME SEC
> VIII Div.1 or as per the applicable code.
>
> Regards
>
> Somesh
>
>

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---