Thursday, August 7, 2008

[MW:999] Re: 993] EQUVIVALENT ASME GRADE OF BS1503 -224 - GR. 28

Dear Mr. Rohit,
 
Thanks for the information. I have gone through it but it does not say specifically about224 - GR. 28
 
Would you pl. thorw some more light on this.
 
Regards,
 
S.N.Dave

--- On Tue, 8/5/08, Rohit Bafna <rohit@tcreng.com> wrote:
From: Rohit Bafna <rohit@tcreng.com>
Subject: [MW:994] RE: 993] EQUVIVALENT ASME GRADE OF BS1503 -224 - GR. 28
To: materials-welding@googlegroups.com
Date: Tuesday, August 5, 2008, 9:05 PM

Dear Mr. Dave,

 

Please look at http://www.e-pipe.co.kr/eng/bs_no/bs_9.htm

 

 

Regards,

Rohit Bafna

Director - Global Sales

 

------------------------------------------

TCR Engineering Services (India)
TCR Arabia (KSA), TCR Kuwait

TCR World Inc. (USA)

USA Tel: +1-240-505-0739

India Tel: +91-983-353-0400

www.tcreng.com
Material Testing | Consulting | Inspection | NDT Services

-------------------------------------------

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of shailesh dave
Sent: Tuesday, August 05, 2008 8:39 AM
To: materials-welding@googlegroups.com
Subject: [MW:993] EQUVIVALENT ASME GRADE OF BS1503 -224 - GR. 28

 

DEAR MEMBERS,

 

CAN ANYBODY LET ME KNOW THE EQUIVALENT ASME GRADE OF BS1503 -224-GR.28. WHERE FROM I CAN HAVE THIS INFORMATION AS READY RECKONER.

 

REGARDS,

 

SHAILESH

 

QA/QC INCHARGE

 

ADGAS DAS ISLAND UAE





--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:34874] ASME IX, groove weld during WQT limits for Fillet Weld production

Hi David,  There are two points in WQT. 1. Thickness of Base Metal -T 2. Thickness of Weld Metal -t When you use a combination of two proces...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...